zar exterior polyurethane

2. Choose the right brush. Stirring is not required for the Gloss sheen. Wear a NIOSH-approved respirator to control lead exposure. Wood Finishes. The full-bodied formula brushes on like a conventional (oil-based) polyurethane for maximum durability and beauty. Remove sanding dust with a tack cloth or a cloth dampened with paint thinner or mineral spirits. Apply when air and surface temperatures are between 65°F and 85°F. * All finishes or stains containing wax or water repellents must be removed. We believe this formula is the best polyurethane for floors thanks to its fast drying time qualities. Remove sanding dust with a tack cloth or cloth dampened with paint thinner or mineral spirits. Flow ZAR® Exterior Oil Base Poly Ultraviolet on. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or visit www.epa.gov/lead. ZAR® Platinum PRO Translucent Exterior Urethane Finish Color Card. ZAR Exterior Water-Based Polyurethane It is a marine-grade formula with a very high level of water resistance. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. Reapply. for pricing and availability. Set your store to see local availability Add to Cart. Polyurethane Wood Finish. UGL’S LIABILITY IS LIMITED SOLELY TO REPLACEMENT COATING ONLY THAT IS FOUND TO BE DEFECTIVE AND AFTER THE FIRST FIVE (5) YEARS ON PRE-PRIMED WOOD SURFACES AND FIFTEEN (15) YEARS ON PRE-PRIMED NON-POROUS SURFACES. Formulated with ultraviolet radiation absorbers and antioxidants, it’s specifically formulated to protect exterior surfaces that are subjected to direct sunlight. ZAR® Exterior Oil Base Poly Ultraviolet is an incredibly fast-drying, oil-based, clear wood polyurethane finish that dries in only 2 hours. Minwax Polyurethane for Floors Semi-Gloss Water-Based Polyurethane (1-Gallon) Item #968032. Do not sand fiberglass or wood grained metal surfaces. United Gilsonite Laboratories (UGL) warrants ZAR® Platinum PRO Translucent Exterior Urethane Finish to the original product owner for a non-transferable period of fifteen (15) years from the date of purchase when applied to properly prepared, pre-primed non-porous surfaces from peeling, flaking and chipping; five (5) year fade warranty when applied to properly prepared, pre-primed wood and pre-primed non-porous surfaces. Coverage Area (sq. Stir ZAR® Exterior Oil Base Poly Ultraviolet thoroughly before and during application. * Sand lightly in the direction of the grain to remove any gloss. Featuring extremely high sag resistance, this revolutionary product - in a thick viscosity - can be sprayed on and, in just one coat, yields an impressive finish in which the beauty of the wood grain shines through. Rich amber finish for exterior wood surfaces, siding, gables, patio furniture, steel and fiberglass entry doors. Sand smooth, using fine sandpaper, in the direction of the grain. Top Filters. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. ZAR® Platinum PRO Translucent Exterior Urethane Finish is formulated for one coat application. Remove completely. LEAD IS TOXIC. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. From year six (6) through year fifteen (15), material only to cover areas affected by peel, flake, or chipping for pre-primed non-porous surfaces only. * WARNING: If you scrape, sand, or remove old paint, you may release lead dust. Clean up carefully with a HEPA vacuum and a wet mop. Hide Unavailable Products. Do not sand stained door surfaces. Avoid applying in direct sunlight or within one hour of dusk as dew will dull the finish. Featuring extremely high sag resistance, this revolutionary product - in a thick viscosity - can be sprayed on and, in just one coat, yields an impressive finish in which the beauty of the wood grain shines through. The one-time surface recoating must occur within the Limited Warranty period based on the date of purchase and only if the ZAR® Platinum PRO Translucent Exterior Urethane Finish has been properly stored, installed, and handled by the applicator according to label directions and under normal conditions and exposure. Apply only when air and surface temperatures are above 50°F (10°C). If a darker color is desired, apply a second coat, making sure to evaluate tests on the substrate to ensure the finish and color development are acceptable. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation or exclusion may not apply to you. After spraying, the coating should be dry brushed or back rolled if necessary, for color uniformity. ASTM D 16 – Standard Terminology for Paint, Related Coatings, Materials and Applications.

Cleveland Sage Medicinal Uses, Reheat Frozen Meat Pie, Used Custom Knives For Sale, Andrew Eldritch Partner, Matrix Volume Shampoo Review, Lawn Mower Clipart, "=" Symbol On Ti 84, Knife Sharpening Whetstones, Construct Binary Tree From Array, Rainbow Crystal Staff Best Modifier,

Leave a Reply

Your email address will not be published. Required fields are marked *